RLink

Versatile microcontroller debugger and programmer supporting a range of target interfaces (JTAG, SWD, SWIM, ICC, ...)

RLink is a versatile, high-performance tool for connecting to 32-bit and 8-bit microcontrollers to program the target device and debug application code.

RLink connects to application, or evaluation boards via JTAG, SWD for ARM Cortex M-based microcontrollers. It supports STMicroelectronics' SWIM protocol for STM8, and ICC protocol for ST7.*

* Note: ST72C variants are not supported.

RLink is driven by the Ride7 integrated development environment for debugging and programming of microcontroller applications. With the RFlasher programming software, it also provides a very-low cost programming solution for laboratory and production environments.

STX-RLINK

STX-RLINK is the STMicroelectronics' part number for the Raisonance RLink-STD or "Standard". The two products are technically identical, support the same range of microcontrollers and offer the same performance characteristics using the same software packages.

ST has stopped selling STX-RLINK, however the RLink is still available from Digi-Key and other Raisonance tool distributors.

In addition to the STM32 and STM8 microcontroller families, RLink supports legacy microcontrollers that are not supported by other programmer/debuggers such as the ST7, STR7 and STR9 families.

Downloads

RLink is supported by the Ride7 software development environment and Raisonance RKit-ARM* and RKit-STM8 (STM8 / ST7)* software. Download Ride7 and associated RKits from the Raisonance support web site.

Note* : Code size limitations apply when using these software with RLink. Please refer to the user documentation for further details.